Roll cutter - メーカー・企業と製品の一覧

Roll cutterの製品一覧

1～10 件を表示 ／ 全 10 件

表示件数
Semi-Automatic Roll Cutter "CM-330S"

Semi-Automatic Roll Cutter "CM-330S"

Easy operation with one touch! Excellent economy, efficiency, and heat resistance to accommodate various materials!

The "CM-330S" is a semi-automatic roll cutter (double-edged grinding machine) that uses borazon grinding stones, excelling in economic efficiency, effectiveness, and heat resistance. The rotation of the cutter and chuck is infinitely variable through inverter control. The shaft is custom-made to fit paper tubes, ensuring there is no rotational wobble of the raw material. In addition to adjusting the grinding angle and position, the operation of the shaft indicator rod and the exchange of the chuck's outer claws can be done with a single touch. The operation switches are centralized at the operator's fingertips, and the cutting dimensions can be easily input via a touch panel. Moreover, it is equipped with safety features that automatically stop the machine if there is an abnormal load on the cutter or chuck. 【Features】 ■ Excellent economic efficiency (long-term durability) ■ Excellent effectiveness (reduced grinding time, resistant to clogging) ■ Excellent heat resistance (capable of long grinding sessions) ■ Various adjustments and operations can be performed with a single touch ■ Double and triple safety measures ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic Roll Cutter "CC-300A"

Fully Automatic Roll Cutter "CC-300A"

Design focused on safety, productivity, and operability! The cutting surface is beautiful with a speed cut!

The "CC-300A" is a device that cuts with a stroke even when the diameter of the raw material changes, enabling a reduction in cycle time and preventing accidents due to forgotten adjustments. The cutting speed of the chip saw automatically shifts through three stages. It gradually speeds up from a slow start and then slows down again during paper tube cutting, resulting in a beautifully finished cut surface. Even if the diameter of the round blade changes due to grinding, the forward stop position is automatically adjusted, ensuring a clean cut to the paper tube. Additionally, the grinding device uses borazon grinding stones, making it an economical, efficient, and heat-resistant grinding machine (double-edged grinding machine). 【Features】 ■ Automatically detects the end of the raw material and moves to the starting position for operation. ■ Easy operation for adjusting grinding angle and position. ■ Dimension and quantity settings can be done with a one-touch operation on the LCD panel. ■ Operation switches are consolidated at the operator's hand. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic High-Speed Roll Cutter 'CX-310A'

Fully Automatic High-Speed Roll Cutter 'CX-310A'

Improved productivity with automatic detection of high-speed motors and raw material diameters! Equipped with an automatic sharpening device for cutters. A substitute for slitting machines.

The "CX-310A" is a fully automatic high-speed roll cutter equipped with a high-speed motor, achieving a significant increase in productivity compared to conventional machines. It can automatically detect the diameter of the raw material and cut with the shortest stroke for each. This contributes to reducing cycle time and preventing accidents caused by forgotten adjustments. It can also be used as a replacement for slitter machines, meeting needs such as "not wanting to open the roll," "wanting to keep introduction costs down," and "wanting to shorten processes." 【Features】 - Simultaneous opening and closing of inner and outer claws with the push of a button - Automatic raising and lowering of the shaft with the push of a button - Automatic conversion of cutting speed in three stages - Equipped with an automatic grinding device - User-friendly color LCD panel - Automatic detection of the edge of the raw material ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the materials. Feel free to reach out with any inquiries.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Can't ask now! What is the difference between a roll cutter and a slitter? *Materials available.

Can't ask now! What is the difference between a roll cutter and a slitter? *Materials available.

I will explain the differences between a roll cutter and a slitter in an easy-to-understand manner.

This document introduces the differences between roll cutters and slitters. A roll cutter is a machine that processes materials into circular slices. A slitter is a machine that draws out roll-shaped materials and cuts them using free-spinning circular blades or fixed blades, then processes them into rolls. A list of handled products and compatible materials is also included. 【Contents】 ■ What is a roll cutter? ■ What is a slitter? ■ List of handled products ■ List of compatible materials ■ Frequently Asked Questions (Q&A) ■ Contact information ★ We will be launching a new model of automatic winding machine at the "10th High-Performance Film Exhibition" starting on December 4. Please refer to the basic information for details about the exhibition. ★ We are also accepting online meetings (via Skype) at any time, so feel free to contact us. * For more details, please refer to the PDF document or feel free to reach out to us.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic High-Speed Film Roll Cutter 'CC-1000F'

Fully Automatic High-Speed Film Roll Cutter 'CC-1000F'

Automatic detection of the edge of the original! Settings can be done with a single touch on the 10-inch color LCD touchscreen.

The "CC-1000F" is a fully automatic high-speed film roll cutter equipped with high-speed motors for front, back, left, and right movement, increasing production volume by 1.5 to 2 times compared to conventional machines. The machine dimensions are D3,500 × W3,300 × H2,300, and the weight of the machine body is 2,000 kg. There are 5 types of dimension and quantity settings (custom options are available for any number of types), and settings can be made with a single touch using a 10-inch color LCD touch panel. Additionally, we offer various options to enhance work efficiency. 【Features】 ■ Production volume increased by 1.5 to 2 times compared to conventional machines ■ Cutting speed automatically converts in 3 stages ■ Chip saw blade: confident in the finish due to unique structure ■ Mechanical shaft: opens and closes with the push of a button ■ Automatic deceleration of cutting speed on the chuck side *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Roll Cutter "CX-310A"

Roll Cutter "CX-310A"

A roll cutter that significantly shortens cycle time and contributes to increased production volume!

The "CX-310A" is a fully automatic high-speed roll cutter (roll slitter) equipped with high-speed motors for front, back, left, and right movement. It cuts with a stroke even when the diameter of the raw material changes, reducing cycle time and preventing accidents caused by forgetting adjustments. With a three-stage automatic conversion of the cutting speed of the chip saw (cutter), it starts cutting slowly and gradually speeds up. When cutting paper tubes, it slows down again, and after cutting, it retracts at high speed. Additionally, it automatically detects the width of the raw material end, and dimension and quantity settings can also be done with a single touch, which is one of its features. 【Features】 ■ High-speed motors for front, back, left, and right movement ■ Automatic detection of raw material diameter ■ Three-stage automatic conversion of cutting speed ■ Automatic chuck included ■ Automatic lifting and lowering of the shaft holder ★ We are also accepting online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic Roll Cutter "CA-320A"

Fully Automatic Roll Cutter "CA-320A"

Compact design and switchable to semi-automatic operation! Easy one-touch operation roll cutter!

The "CA-320A" is a compactly designed roll cutter that takes up less space compared to conventional fully automatic models. It can also switch to semi-automatic operation, allowing for greater maneuverability. The cutter (chip saw) and chuck rotation are controlled by an inverter, enabling stepless speed variation. Additionally, it can be used as a double-edged grinding machine. Adjustments for grinding angle and position, as well as instructions for cut dimensions and quantities, can be done with a single touch, making it easy for anyone to operate. 【Features】 ■ Compact design ■ Switchable to semi-automatic operation ■ Reduced cut cycle time ■ Grinding device uses borazon grinding wheels (long-lasting) ■ Adjustments and settings can be done with a single touch, making it easy for anyone to operate ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic Large Diameter Roll Cutter "CC Series"

Fully Automatic Large Diameter Roll Cutter "CC Series"

Eliminate unnecessary movements and shorten cutting time! We achieve beautifully finished cut surfaces at high speed.

The "CC Series" is a cutter (double-edged grinding machine) for cutting large diameter rolls. It eliminates dimensional errors caused by blade wobble, resulting in a straight finish without welding on the cut surface. Even if the diameter of the raw material changes, the cutter's stroke length is automatically adjusted, eliminating unnecessary movements and significantly reducing cutting time. The grinding device is installed, allowing for sharpening without removing the circular blade. The cutting surface is always beautifully finished. The rotation of the chip saw (cutter) can be selected as drive, free, or fixed, allowing for optimal cutting conditions. 【Features】 ■ The forward stop position is automatically adjusted even if the diameter of the circular blade changes due to grinding, etc. ■ Cutting dimensions and the number of cuts can be set with a single touch on the color LCD touch panel. ■ When not in operation, the circular blade is stored within a safety cover. ■ The shaft support rod is automatically raised and lowered. ■ Double and triple safety measures. ★ We also accept online meetings (Skype) at any time, so please feel free to contact us. * For more details, please refer to the catalog or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Automatic High-Speed Roll Cutter for Slicing

Automatic High-Speed Roll Cutter for Slicing

A slice slitter that doubles production volume! Automatic detection of raw material diameter reduces cycle time and also prevents accidents!

The "CX-310A" is a roll-type slitter that can cut sheet materials without unrolling them. With the CX-310A's saw blade, it is capable of cutting various materials including fiber fabrics, interlinings, non-woven fabrics, and glass fibers. Equipped with a high-speed motor for front, back, left, and right movement, the production volume has increased by 1.5 to 2 times compared to conventional machines. The cutting speed automatically converts in three stages. Additionally, it can also be used as a sharpening machine (double-edged sharpening machine). Furthermore, with automatic detection of the raw material diameter, it can cut even if the diameter changes. This helps reduce cycle time and prevents accidents due to forgotten adjustments. (Patent registered) 【Features】 ■ High-speed motor for front, back, left, and right movement ■ Automatic detection of raw material diameter ■ Three-stage automatic conversion of cutting speed ■ Automatic chuck ■ Automatic lifting of shaft support (air-operated) *We also offer modifications and development based on your requests, so please feel free to consult us. ★ We are also accepting online meetings (Skype) at any time, so please do not hesitate to contact us. *For more details, please refer to the PDF document or feel free to inquire.

  • Other fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fully Automatic High-Speed Film Roll Cutter 'CC-500F'

Fully Automatic High-Speed Film Roll Cutter 'CC-500F'

Three-stage automatic cutting speed conversion! The chip saw blade can be customized to a round blade specification.

The "CC-500F" is a fully automatic high-speed film roll cutter equipped with high-speed motors for front, back, left, and right movement. The cutting speed automatically changes in three stages, starting slowly and gradually speeding up, then slowing down again during paper tube cutting, and finally retracting at maximum speed after cutting. Additionally, air is injected during cutting to prevent the chip saw from clogging. 【Features】 ■ Prevents the welding of base materials ■ Automatically detects the edges of base materials ■ Automatic deceleration of cutting speed on the chuck side ■ Production volume increases by 1.5 to 2 times compared to conventional machines ■ The chip saw blade has a unique structure, ensuring confidence in the finish *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Roll cutterの関連カテゴリ

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.